-
-
#ARWC34
Teng 3/4"Dr Air Impact Wrench Composite 1830Nm Teng 3/4"Dr Air Impact Wrench Composite ...
Low in StockThree forward steps up to 450Nm Reversible for tightening or loosening Forward/reverse button for one handed operation High torque action Extra lightweight composite housing Sound absorbent housing for noise reduction Twin hammer mechanism for increased...
-
#ARWM12M
Teng 1/2"Dr Air Impact Wrench Mini 770Nm
Low in StockThree forward steps up to 680Nm Compact and lightweight for use in confined spaces Extra high torque capacity for the size and weight Jumbo clutch mechanism Reversible for tightening or loosening Forward/reverse button for one handed operation Extra...
-
#TTDAWM13M
Teng 1/2"Dr Mini Air Impact Wrench Set - TTD Tray 13pc Teng 1/2"Dr Mini Air Impact Wrench Set -...
Low in StockCompact and lightweight 1/2" drive impact wrench For use in confined spaces Supplied with stubby 1/2" drive impact sockets Supplied in the unique TengTools TT2 module to be used within the Tool Control system Organised in a tool tray module...
-
#SI-1320A
Shinano Ratchet Wrench 3/8" Sq Drive
Low in StockSuper compact for hard to reach areas only 125mm long wobble drive output - specially shaped square drive which allows the socket to rotate at an angle like a universal joint. This enables the ratchet wrench to get into even tighter spaces one-handed...
-
#SI-2351
Shinano Disc Sander 180mm.
Low in StockAngle head sander with 7" disc. Rear exhaust through the handle directs air away from the user and workplace. Free speed 4,500 RPM.
-
#ARWM34
Teng 3/4"Dr Air Impact Wrench 1830Nm
Stock availableAluminium Housing TWIN HAMMER mechanism One-hand forward/reverse 3-step forward/reverse (1790Nm / 1830Nm) Ergonomic handle design
-
Out of stock#M7-NC4610Q
M7 Air Mini Impact Wrench Q-Series 1/2"Dr 500 ft/lb M7 Air Mini Impact Wrench Q-Series 1/2"D...
Available on RequestFEATURES Jumbo Hammer Type. Q Series SPECIFICATIONS Square Drive: 1/2" Bolt Capacity: 5/8" (16mm) Torque Range: 200-350 ft-lb / 271-475 Nm Max Torque at 5 seconds: 500 ft-lb / 678 Nm Free Speed: 9000 RPM Air Requirement: 4.4 CFM / 90 PSI /...
-
Out of stock#M7-NC6236QH
M7 Impact Wrench Ez Grease Anvil 3/4"Dr 1200 ft/lb M7 Impact Wrench Ez Grease Anvil 3/4"Dr ...
Available on RequestFEATURES Patented EZ Grease Anvil. Extra heavy duty quality & durability. Extremely light weight, 50% compared to ordinary models. Twin hammer type. Q-Series SPECIFICATIONS Square Drive: 3/4" Bolt Capacity: 1" (25mm) Torque Range:...
-
Out of stock#M7-NC8217
M7 Air Impact Wrench 1"Dr 1500 ft/lb
Available on RequestFEATURES New twin hammer type SPECIFICATIONS Square Drive: 1" Bolt Capacity: 1-1/4" (30mm) Torque Range: 200-1300 ft-lb / 271-1762 Nm Max Torque at 5 seconds: 1500 ft-lb / 2034 Nm Free Speed: 4800 RPM Air Requirement: 5.4 CFM / 90 PSI /...
-
Out of stock#M7-NE499
M7 Air Impact Wrench Angle 1/2"Dr 250 ft/lb M7 Air Impact Wrench Angle 1/2"Dr 250 ft...
Available on RequestFEATURES 1/2" Square Drive Angle Impact Wrench. Mighty innovative, convenient forward & reverse ring control. Mighty small, easy to reach narrow spaces SPECIFICATIONS Square Drive: 1/2" Bolt Capacity: 9/16" (14mm) Torque Range:...
-
Out of stock#M7-NE432
M7 Air Ratchet Wrench Quick Release 1/2"Dr M7 Air Ratchet Wrench Quick Release 1/2"...
Available on RequestFEATURES 1/2" Square Drive Air Ratchet Wrench SPECIFICATIONS Square Drive: 1/2" Torque Range: 10-45 ft-lb / 13.5-61 Nm Max Torque at 5 seconds: 60 ft-lb / 80 Nm Free Speed: 160 RPM Air Requirement: 4 CFM / 90 PSI / 1/4" Inlet Overall...
24 of 113 products